ARB LED Intensity Solis Flood Or Spot Light 7″ PAIR

Description INTENSITY SOLIS LED DRIVING LIGHTS A NEW INTENSITY OF DRIVING LIGHT Intensity Solis LED Driving Lights are available in a Spot or Flood beam which come with interchangeable red and black die-cast side bezels. New to the Intensity range is the Solis’ 5-stage dimmability function, while the introduction of a highly tuned single-piece reflector and 165 watts of OSRAM LED performance bring it to the top of the class in light output. Not just a remarkable performer, Intensity Solis driving lights represent a value proposition that is worth considering if you’re looking to add some additional driving lights to your vehicle. SPOT, FLOOD OR A COMBINATION? How you set up your driving lights should reflect the type of driving and terrain you are driving in. In areas of wide open land and fast roads such as Outback Queensland, New South Wales and the Northern Territory, a set-up of two spot lights will give you the best throw of light reaching as far down those long straight roads as possible. For drivers who are predominantly in heavy bush with lots of winding roads such as the Victorian High Country, a set-up of two flood lights will fill the foreground, giving you great visibility to the side of the roads where roos like to hide and throught he next close corner. For most drivers, however, the combination of one spot (driver’s side) and one flood provides the best of both worlds. The single spot throws a strong direct beam down the road over 1km, while the flood beam fills the foreground and roadside what is often considered the optimal driving light pattern and output. LIGHT OUTPUT AND DIMMABILITY The combination of 6x 10 watt and 30x 4 watt performance OSRAM LEDs with a highly tuned reflector design has brought the Intensity Solis to the top of the class in light output. Measured as a pair of spot beams, the Solis boasts 1 lux @ 1462 metres. Individually, a single flood beam will achieve 1 lux @ 729 metres while one spot beam has an impressive 1032 metres throw. Lights this bright need some level of containment, which is why Intensity Solis lights are sold standard with a 5-stage dimmability switch. SQUATTING DESIGN STRENGTH The squat shape of the new light better suits bull bar pan mounting and helps with lowering the centre of gravity of the lights, making them more stable with less oscillation and vibrating which puts less stress on light and bull bar mounting components (including tabs where applicable). The Solis light is mounted in an all black, vertical-pivoting adjustable, cast aluminium cradle.  INTENSITY SOLIS SPECIFICATIONS SPOT FLOOD Input 10 – 30V 10 – 30V Power 165 W 165 W Current Draw 12.4A @ 13.2V 12.4A @ 13.2V Output – Raw 18,178 lumens 18,178 lumens Output – Effective 9,546 lumens 8,333 lumens 1 Lux Reading 1,032m 729m Spread 6 degrees 11 degrees Input Cable Length 450mm 450mm Operating Temperature (°C) -40°C to 65°C -40°C to 65°C Operating Temperature (°F) -40°F to -149°F -40°F to -149°F Colour Temperature 5,700 Kelvin 5,700 Kelvin Weight 3.3kg (7.27lbs) 3.3kg (7.27lbs) Connector 4-pin AT – waterproof plug 4-pin AT – waterproof plug Dimensions (mm) 225mm (w) x 220mm (h) x 120mm (d) 225mm (w) x 220mm (h) x 120mm (d) Dimensions (inches) 8.9″ (w) x 8.7″ (h) x 4.7″ (d) 8.9″ (w) x 8.7″ (h) x 4.7″ (d) Warranty 3 Years 3 Years Check out the 9″ spots/Floods Here More infomations Found Here! INCLUDES: WIRING HARNESS